Weltrend

Products

WT6632F

【 General Description 】

The WT6632F is a highly integrated USB Power Delivery (USB PD) controller that supports USB PD 3.0 specification and Qualcomm® Quick ChargeTM 3.0 technology designed for USB Type-C® Downstream Facing Port (Source) charging applications such as power adapters, wall chargers, car chargers, power strip, power banks, and etc.

The WT6632F minimizes external components by integrating USB PD baseband PHY, USB Type-C detection, shunt regulator, voltage and current monitors, and control circuits of blocking MOSFET, and an 8-bit MCU to allow small form factor and low BOM cost. It supports wide operation voltage range from 3V to 30V without the need of an external LDO. A Multi-Time-Programmable (MTP) ROM is provided for program code and user configuration data.

The WT6632F is certified by USB Implementers Forum (USB-IF) for USB Type-C PD (TID: 1070017).

【 Features 】
●	USB Type-C Downstream Facing Port (Source)
●	USB PD 3.0 baseband communication
●	Built-in shunt regulator and support 3V to 20V VBUS output
	- programmable Constant Voltage
	- programmable Constant Current
●	Programmable Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Current Protection (OCP) and Over Temperature Protection (OTP)
●	Low side voltage output current shunt monitor
●	Supports USB BC1.2 and QC3.0 HVDCP
●	Supports Fast Charge Protocol
●	Supports MIPIR Battery Interface V1.1 (BIF)
●	10-bit ADC for voltage and current monitoring
●	8-bit MCU
	- implements Power Delivery message protocol and device policy
	- VBUS output control
	- Power supply protection
●	Multi-Time-Programmable (MTP) ROM
●	External blocking MOSFET control
●	Built-in discharge MOS
●	Internal RC oscillator
●	Internal VDD regulator
●	General purpose I/Os
●	Serial interface: UART
●	Slave mode I2C interface
●	Supports power saving mode
●	Operating voltage range: 3V to 30V
●	Operating temperature range: -20°C to +105°C
●	Package: 14-pin SOP, 16-Pin QFN

BACK