【 Features 】 |
● |
Embedded Turbo 8052 compatible CPU |
|
-Normal operation mode: 24MHz, 12MHz, 6MHz, 2MHz or 12MHz, 6MHz, 3MHz, 1MHz (Selectable Clock Sources) |
|
-Instruction execution time : Min. =125ns at OSC=24Mhz, MAX=500ns (“MUL” & “DIV” instruction) |
● |
Memory: |
|
-Flash memory : 64K Bytes |
|
-RAM: 1K+256 Bytes |
● |
6 similar 8052 timer : Timer0, Timer1, Timer2, Timer3, Timer4, Timer5 |
● |
4 similar 8052 UART Ports, Support baud rate 115200 - 1200 at OSC=12/24MHz |
● |
2 HV sync processor |
|
-Support 2 H/V inputs, Support H+V input |
|
-H/V frequency counter for monitoring DPMS |
|
-H/V input polarity detector and programmable H/V(HOUT/VOUT) output polarity |
● |
10-bit A/D converter with 8 selectable inputs and can accepted external reference voltage (max=3.3v) |
● |
8 8-bit PWM pin output and 4 10-bit selectable clock LPWM pin output |
● |
Support 1 DDC/CI /slave I2C interface, and 1 master/slave I2C interface |
● |
Hardware universal IR Receiver with 8 selectable inputs |
● |
Embedded H/W CEC function (CEC pad supports open drain structure) |
● |
Watch Dog timer |
● |
Build-in RTC |
● |
Power down mode |
|
-Selectable CPU clock sources |
|
-Support “IDLE” mode and “OFF” mode |
|
-CPU off mode can be waked up by external interrupt |
● |
Power consumption : |
|
-Typical 24mA at 24MHz mode |
|
-Typical 8mA at 2MHz mode |
|
-Typical 3mA at “IDLE” mode, only RTC alive mode |
|
-Lower than 100uA at “OFF” mode |
● |
Maximum 53 programmable IO pins |
● |
Build-in ISP function (IIC bus or UART bus) |
● |
Embedded ICE mode with 8 break points (IIC bus or UART bus) |
● |
Operation voltage: 3.6V – 3.0V (3.3V +/- 10%) (Tolerable IO structure – accept 5V signal input) |
● |
Package |
|
-LQFP 64 |