【 Features 】 |
● |
8-bit Turbo 8052 compatible CPU with 24MHz operating frequency |
● |
12MHz or 24MHz crystal oscillator (selectable by S/W) |
● |
32kHz RC Ring Clock for off line and low power mode |
● |
16K bytes Flash ROM including EEPROM emulation |
● |
512 bytes SRAM |
● |
USB features: |
|
- Complete compatible with Universal Serial Bus specification 2.0 Full / Low Speed |
|
- 1 control endpoint, IN/OUT each with 64 Bytes (8/16/32/64-byte programmable) FIFO |
|
- 3 Generic endpoints (IN/OUT INT/Bulk programmable) each with 64-Byte (8/16/32/64 bytes programmable) FIFO; Endpoint 3 can also be configured as OUT token for endpoint 1 or 2 |
|
- Supports USB Suspend, Resume and Remote Wakeup |
● |
19-channel 12-bit ADC with external reference voltage input |
● |
2-ch 8-bit PWM output |
● |
Idle and power down modes supported |
● |
Standard RS232 data transmission: up to 230400bps |
● |
1 SPI interface |
|
- Master/Slave mode selectable |
|
- Max speed: 2MHz |
|
- Data length per transaction: 1-byte |
● |
45(max.) GPIO pins for chip form and LQFP64; 37(max.) GPIO pins for LQFP48; 33(max.) GPIO pins for LQFP44 |
● |
USB-related circuit and V33 voltage regulator can be disabled for portable applications which are powered by battery (VBAT <= 3.6V) |
● |
16 high sink current IO for LED control: Port A and Port E |
● |
IO falling edge detect interrupt, can work as wakeup trigger at the power down mode: Port A |
● |
Three 16-bit timer/counter |
● |
Watch-dog timer (10ms ~ 640ms programmable) |
● |
ISP function by 6-pin I2C (VDD5V, VSS, OSCI, RESETN, SCL, SDA pins) or USB interface |
● |
On-chip ICE |
● |
Operating voltage: 2.4V~5.25V |
● |
Package: LQFP48/64 |