返回
Products
Power Management
Imaging Solutions
Motor Controllers and Drivers
Microcontrollers (MCUs)
Amplifiers
Interfaces
返回
Applications
Automotive
Consumer Electronics
Enterprise Systems
Industrial
Power Supplies
返回
Supports
Support Tools
Technical Information
Software Download
Reference Designs
返回
News & Events
News & Events
返回
ESG
Sustainable Development Policy and Implementation
Stakeholders
返回
Investors
Financials
Corporate Governance
Shareholder Services
Contacts
WT7502R
The WT7502R provides protection circuits, power good output (PGO), fault protection latch (FPOB), and a protection detector function (PSONB) control. It can minimize external components of switching power supply systems in personal computer.
The Over / Under Voltage Detector (OVD / UVD) monitors V33, V5 and VCC input voltage level. When OVD or UVD detects the fault voltage level, the FPOB is latched HIGH and PGO goes low. When PGI detects the fault voltage level, the FPOB would be kept LOW and PGO goes low. The latch can be reset by PSONB going HIGH. There is 3.5 ms delay time for PSONB turning off FPOB.
When PGI, OVD and UVD detect the right voltage level, the power good output (PGO) will be issued.
Features
- The Over / Under Voltage Detector (OVD / UVD) monitors V33, V5 and VCC input voltage
- Both of the power good output (PGO) and fault protection latch (FPOB) are Open Drain Output
- 75ms / 50ms time delay for UVD
- 125ms time delay for PGO
- 19ms for PSONB input signal De–bounce
- The UVP able to block PGO
- 73us for PGI / UVD internal signal De–bounce
- 55us / 35us for OVD internal signal De–bounce
- 2.4ms / 3.5ms time delay for PSONB turn-off FPOB
- The UVD would been disabled when PGI < 1.2V
- The Over / Under Voltage Detector (OVD / UVD) monitors V33, V5 and VCC input voltage
Applications