Features

• • USB Type-C and USB-PD
    

  - Supports USB PD 3.2 SPR & EPR 48V
  

  - Source, Sink and DRP configurable
  

  - Programmable USB Type-C pull-up Rp (current source)
  

  - Sink CC termination (Rd)
  

  - Dead battery operation
  

  - Cable plug and orientation detection
  

  - Integrated Vconn power and switch for E-marked & EPR-capable cable
  

  - Connector liquid detection
  

  • Fast Charge Protocols
    

  - QC 3.0 (only support 5V to 12V) Source
  

  - UFCS (5.5V to 21V), Source/Sink
  

  - DP/DM cable plug-in detection
  

  - Apple Mode
  

  • Built-in buck/boot converter control
    

  - Programmable constant voltage control
  

       PPS 5V to 21V, 20mV/step
  

       SPR AVS 9V to 20V, 100mV/step
  

       EPR AVS 15V to 48V, 100mV/step
  

  - Programmable constant current control
  

  • Low-side bi-direction current monitor and reverse current detection
    
  • Programmable fault protections
    

  - OVP include VSYS, VBUS and VBAT
  

  - UVP include VSYS, VBUS and VBAT
  

  - OCP bi-directional and low side current sense
  

  - Multiple OTP pins
  

  • VBUS Load Switch Driver
    
  • 12-bit ADC for voltage and current monitoring
    
  • MCU
    

  - Turbo 8051 compatible MCU
  

  - 34K bytes Multi-Time-Programmable (MTP) ROM
  

  • Two 400 kHz Master/Slave IICs
    
  • One UART
    
  • Built-in discharge MOS transistor (with internal over temperature protection)
    
  • Supports power down mode: typical 10uA at cable detached
    
  • Operating voltage range: 4V to 66V (71V Max. rating)
    
  • Operating temperature range: -20°C to +105°C
    
  • Green Package: 32-pin QFN (5mmx5mm)