subscribe newsletter
Back
Products
Power Management
Imaging Solutions
Motor Controllers and Drivers
Microcontrollers (MCUs)
Amplifiers
Interfaces
Back
Applications
Automotive
Consumer Electronics
Enterprise Systems
Industrial
Power Supplies
Back
Supports
Support Tools
Technical Information
- Overview
- WLINK Adapter Installation Guide
- ICE/ISP Operation Guide
- Evaluation Board User Guide
- Mass Production Programmer Operation Manual
- Mass Production Tools and Supplier Information
- ULINK ICE & ISP User Guide
- Peripheral Functions & Program User Guide
- Weltrend ARM 32-bit MCU Evaluation Boards List
Software Download
Reference Designs
Back
News & Events
News & Events
Back
ESG
Sustainable Development Policy and Implementation
Related Topics
Back
Investors
Financials
Corporate Governance
Shareholder Services
Contacts
Back
Careers
WT6679F
The WT6679F is a highly integrated USB Power Delivery (USB PD) Dual-Role-Power (DRP) controller that supports USB PD 3.2 SPR & EPR 48V specification. It is designed for E-bike battery pack applications. It could support up to 14S (58.8V max.) battery pack. The WT6679F minimizes external components by integrating USB PD baseband PHY, USB Type-C detection, buck/boot converter control, voltage and current monitors, NMOS load switch driver, 400 kHz Master/Slave IIC, UART and an 8-bit MCU to allow small form factor and low BOM cost. Wide operation voltage range (3.3V to 66V) supports USB PD 3.2 SPR & EPR 48V specification. A Multi-Time-Programmable (MTP) ROM is provided for program code and user configuration data.
Features
- USB Type-C and USB-PD
- Supports USB PD 3.2 SPR & EPR 48V
- Source, Sink and DRP configurable
- Programmable USB Type-C pull-up Rp (current source)
- Sink CC termination (Rd)
- Dead battery operation
- Cable plug and orientation detection
- Integrated Vconn power and switch for E-marked & EPR-capable cable
- Connector liquid detection
- Fast Charge Protocols
- QC 3.0 (only support 5V to 12V) Source
- UFCS (5.5V to 21V), Source/Sink
- DP/DM cable plug-in detection
- Apple Mode
- Built-in buck/boot converter control
- Programmable constant voltage control
PPS 5V to 21V, 20mV/step
SPR AVS 9V to 20V, 100mV/step
EPR AVS 15V to 48V, 100mV/step
- Programmable constant current control
- Low-side bi-direction current monitor and reverse current detection
- Programmable fault protections
- OVP include VSYS, VBUS and VBAT
- UVP include VSYS, VBUS and VBAT
- OCP bi-directional and low side current sense
- Multiple OTP pins
- VBUS Load Switch Driver
- 12-bit ADC for voltage and current monitoring
- MCU
- Turbo 8051 compatible MCU
- 34K bytes Multi-Time-Programmable (MTP) ROM
- Two 400 kHz Master/Slave IICs
- One UART
- Built-in discharge MOS transistor (with internal over temperature protection)
- Supports power down mode: typical 10uA at cable detached
- Operating voltage range: 4V to 66V (71V Max. rating)
- Operating temperature range: -20°C to +105°C
- Green Package: 32-pin QFN (5mmx5mm)
- USB Type-C and USB-PD
Applications