USB Power and Charging Port Controllers
WT6630P
| 【 General Description 】 |
| The WT6630P is a highly integrated USB Power Delivery (USB PD) controller that supports USB PD 2.0 specification designed for USB Type-C® Downstream Facing Port (Source) charging applications such as travel adapters, charger, and power banks. |
| The WT6630P minimizes external components by integrating USB PD baseband PHY, USB Type-C detection, shunt regulator, voltage and current monitors, control circuits of blocking MOSFET, and an 8-bit MCU to allow small form factor and low BOM cost. It supports wide operating voltage range from 4V to 30V without the need of an external LDO. An One-Time-Programmable (OTP) ROM is provided for program code and user configuration data. |
| The WT6630P is certified by USB Implementers Forum (USB-IF) for USB Type-C PD (TID: 1020008). |
| 【 Features 】 | |
| ● | USB Type-C Downstream Facing Port (Source) |
| ● | USB PD 2.0 baseband communication |
| ● | Built-in shunt regulator and support 5V to 20V VBUS output |
| ● | Programmable Over Voltage Protection (OVP) and Over Current Protection (OCP) |
| ● | Low side voltage output current shunt monitor |
| ● | 10-bit ADC for voltage and current monitoring |
| ● | 8-bit MCU |
| - implements Power Delivery message protocol and device policy | |
| - VBUS output control | |
| - power supply protection | |
| ● | 8k bytes One-Time-Programmable (OTP) ROM |
| ● | 512 bytes RAM |
| ● | External blocking MOSFET control |
| ● | Internal RC oscillator |
| ● | Internal VDD regulator |
| ● | General purpose I/Os |
| ● | Serial interface: I2C and UART |
| ● | Supports power saving mode |
| ● | Operating voltage range: 4V to 30V |
| ● | Operating temperature range: -20°C to +105°C |
| ● | Package (Green Package): 14-pin SOP, 16-pin QFN |
Follow us
