subscribe newsletter
Back
Products
Power Management
Imaging Solutions
Motor Controllers and Drivers
Microcontrollers (MCUs)
Amplifiers
Interfaces
Back
Applications
Automotive
Consumer Electronics
Enterprise Systems
Industrial
Power Supplies
Back
Supports
Support Tools
Technical Information
- Overview
- WLINK Adapter Installation Guide
- ICE/ISP Operation Guide
- Evaluation Board User Guide
- Mass Production Programmer Operation Manual
- Mass Production Tools and Supplier Information
- ULINK ICE & ISP User Guide
- Peripheral Functions & Program User Guide
- Weltrend ARM 32-bit MCU Evaluation Boards List
Software Download
Reference Designs
Back
News & Events
News & Events
Back
ESG
Sustainable Development Policy and Implementation
Related Topics
Back
Investors
Financials
Corporate Governance
Shareholder Services
Contacts
Back
Careers
WT6675P
The WT6675P is a highly integrated USB Power Delivery (USB PD) controller that supports USB PD 3.2 SPR & EPR 36V specification. It is designed for USB Type-C®power source applications such as power adapters, wall chargers, car chargers, and power strip. The WT6675P minimizes external components by integrating USB PD baseband PHY, USB Type-C detection, shunt regulator, voltage and current monitors, NMOS load switch driver and an 8-bit MCU to allow small form factor and low BOM cost. Wide operation voltage range (3.3V to 45V) supports USB PD 3.2 SPR & EPR 36V specification. One-Time-Programmable ROM is provided for program code and user configuration data. The WT6675P is certified by USB Implementers Forum (USB-IF) for USB PD 3.1 140W (TID: 9066).
Features
- USB Type-C and USB-PD
- Supports USB PD 3.2 SPR & EPR 36V
- Programmable USB Type-C pull-up Rp
- Integrated Vconn power and switch for E-marked cable
- EPR Source capabilities (11 PDOs)
- Built-in shunt regulator
- Support 3.3V to 36V, provide fine tune to increase voltage slightly
- Fine tune voltage: 20mV/50mV
- Programmable constant voltage control
- Low-side current shunt monitor with programmable gain
- Programmable cable drop compensation
- CC1/CC2 OVP (short VBUS protection)
- Programmable fault protections
- Over Voltage Protection (OVP) with programmable voltage
- Under Voltage Protection (UVP) with programmable voltage
- Over Current Protection (OCP)
- Over Temperature Protection (OTP)
- Short circuit protection
- MCU
- Embedded 1T 8051 CPU @10MHz
- 16K bytes One-Time-Programmable ROM
- 768 bytes SRAM
- 10-bit ADC for voltage and current monitoring
- Blocking N-MOSFET control with built-in Charge Pump
- Internal VDD regulator
- One Current Source output pin for controlling PFC
- One Slave I2C interface
- Supports power saving mode
- Operating voltage range: 3.3V to 45V (50V Max. rating)
- Operating temperature range: -20°C to +105°C
- Green Package: 16-pin QFN (4mmx4mm), 14-pin SOP and 10-pin SOP
- USB Type-C and USB-PD
Applications