subscribe newsletter
Back
Products
Power Management
Imaging Solutions
Motor Controllers and Drivers
Microcontrollers (MCUs)
Amplifiers
Interfaces
Back
Applications
Automotive
Consumer Electronics
Enterprise Systems
Industrial
Power Supplies
Back
Supports
Support Tools
Technical Information
- Overview
- WLINK Adapter Installation Guide
- ICE/ISP Operation Guide
- Evaluation Board User Guide
- Mass Production Programmer Operation Manual
- Mass Production Tools and Supplier Information
- ULINK ICE & ISP User Guide
- Peripheral Functions & Program User Guide
- Weltrend ARM 32-bit MCU Evaluation Boards List
Software Download
Reference Designs
Back
News & Events
News & Events
Back
ESG
Sustainable Development Policy and Implementation
Related Topics
Back
Investors
Financials
Corporate Governance
Shareholder Services
Contacts
Back
Careers
WT6653P
The WT6653P is a highly integrated USB Power Delivery (USB PD) controller that supports USB PD 3.0 Programmable Power Supply (PPS) specification, Universal Fast Charging Specification for mobile devices (UFCS) and Qualcomm® Quick Charge ™ 4 or Quick Charge 4+ technologies. It is designed for USB Type-C® power source applications such as power adapters, wall chargers, car chargers, power strip, power bank, and etc. The WT6653P minimizes external components by integrating USB PD baseband PHY, UFCS PHY, USB Type-C detection, shunt regulator, voltage and current monitors, NMOS load switch driver and an 8-bit MCU to allow small form factor and low BOM cost. Wide operation voltage range (3V to 24V) supports USB PD 3.0 Programmable Power Supply specification. One-Time-Programmable ROM is provided for program code and user configuration data.
Features
- USB Type-C and USB-PD
- Supports USB PD 3.0 including Programmable Power Supply (PPS)
- Programmable USB Type-C pull-up Rp
- Integrated VCONN power and switch for reading E-marked cable
- Supports USB BC1.2 DCP
- Support Quick Charge 2.0, 3.0, 4/4+, 5
- Support UFCS
- Supports Fast Charge Protocol (FCP) and Smart Charge Protocol (SCP)
- Built-in shunt regulator
- Programmable constant voltage control
- Programmable constant current control
- Integrated low side current sense amplifier
- Cable drop compensation
- Programmable fault protections
- Over Voltage Protection (OVP)
- Under Voltage Protection (UVP)
- Over Current Protection (OCP)
- Over Temperature Protection (OTP)
- 10-bit ADC for voltage and current monitoring
- MCU
- Turbo 8051 compatible MCU
- 12K bytes One-Time-Programmable (OTP) ROM and 12K byte Mask ROM
- Driver for NMOS load switch
- Built-in discharge MOS transistor
- High voltage CC1. CC2, D+ and D- pins
- Internal RC oscillator
- Internal capless VDD regulator
- General purpose I/Os
- Supports power saving mode
- Operating voltage range: 3V ~ 24V (30V tolerant)
- Operating temperature range: -20°C ~ +105°C
- Green Package: 16-pin QFN, 14-pin SOP and 10-pin SOP
- USB Type-C and USB-PD
Applications