subscribe newsletter
Back
Products
Power Management
Imaging Solutions
Motor Controllers and Drivers
Microcontrollers (MCUs)
Amplifiers
Interfaces
Back
Applications
Automotive
Consumer Electronics
Enterprise Systems
Industrial
Power Supplies
Back
Supports
Support Tools
Technical Information
- Overview
- WLINK Adapter Installation Guide
- ICE/ISP Operation Guide
- Evaluation Board User Guide
- Mass Production Programmer Operation Manual
- Mass Production Tools and Supplier Information
- ULINK ICE & ISP User Guide
- Peripheral Functions & Program User Guide
- Weltrend ARM 32-bit MCU Evaluation Boards List
Software Download
Reference Designs
Back
News & Events
News & Events
Back
ESG
Sustainable Development Policy and Implementation
Related Topics
Back
Investors
Financials
Corporate Governance
Shareholder Services
Contacts
Back
Careers
WT6676F
The WT6676F is a highly integrated USB Power Delivery (USB PD) controller that supports USB PD 3.2 SPR & EPR 36V specification. It is designed for USB Type-C®power source applications such as power adapters, wall chargers, car chargers, and power strips. The WT6676F minimizes external components by integrating USB PD baseband PHY, USB Type-C detection, shunt regulator, voltage and current monitors, NMOS load switch driver and an 8-bit MCU to allow small form factor and low BOM cost. Wide operation voltage range (3.3V to 45V) supports USB PD 3.2 SPR & EPR 36V specification. A Multi-Time-Programmable (MTP) ROM is provided for program code and user configuration data. The WT6676F is certified by USB Implementers Forum (USB-IF) for USB PD 3.1 140W (TID: 9065).
Features
- USB Type-C and USB-PD
- Supports USB PD 3.2 SPR & EPR 36V
- Programmable USB Type-C pull-up Rp (current source)
- Integrated Vconn power and switch for E-marked cable
- Built-in shunt regulator
- Programmable constant voltage control
- Programmable constant current control
- Integrated low side current sense amplifier
- Cable drop compensation
- Supports USB BC1.2 DCP, Quick Charge 4 and Quick Charge 4+ (backward compatible Quick Charge 3.0 and Quick
Charge 2.0)
- Programmable fault protections
- Over Voltage Protection (OVP)
- Under Voltage Protection (UVP)
- Over Current Protection (OCP)
- Over Temperature Protection (OTP)
- 10-bit ADC for voltage and current monitoring
- MCU
- Turbo 8051 compatible MCU
- 17.9K bytes Multi-Time-Programmable (MTP) ROM
- Driver for NMOS load switch
- Built-in discharge MOS transistor
- Internal RC oscillator
- Internal VDD regulator
- PFC control pin
- General purpose I/Os
- Supports power saving mode
- Operating voltage range: 3.3V to 45V (50V Max. rating)
- Operating temperature range: -20°C to +105°C
- Green Package: 16-pin QFN (4mmx4mm)
- USB Type-C and USB-PD
Applications