返回
Products
Power Management
Imaging Solutions
Motor Controllers and Drivers
Microcontrollers (MCUs)
Amplifiers
Interfaces
返回
Applications
Automotive
Consumer Electronics
Enterprise Systems
Industrial
Power Supplies
返回
Supports
Support Tools
Technical Information
Software Download
Reference Designs
返回
News & Events
News & Events
返回
ESG
Sustainable Development Policy and Implementation
Stakeholders
返回
Investors
Financials
Corporate Governance
Shareholder Services
Contacts
WT7578RT
WT7578RT is a switching power supply supervisor which monitors three channel of +12Voutputs. The protections include Over Voltage Protection (OVP), Under Voltage Protection (UVP),Over Current Protection (OCP), External Voltage Protection (VX), and Under Voltage Lockout(UVLO). When fault condition is detected, PGO is asserted to LOW and FPOB latched HIGH.
Features
- Three channels for 12V OVP, UVP
- Two channels for 12V OCP with auto calibration (12VA / 12VB)
- One channel for 12V OCP without auto calibration (12VC)
- External Voltage Protection (VX)
- Fault protection latch with open-drain output stage
- PGO(Power Good Output) with open-drain output stage
- 3 ms or 55μs UVP debounce.(Option)
- 14 μs OVP debounce
- 25 ms OCP debounce
- 1 ms VX debounce
- 20 ms PSONB debounce
- 73 μs PGI debounce
- 70.4 ms PGO delay
- Short-circuit turn-on protection
– 50 ms delay to enable UV/OC/VX detection, depends on PGI condition.
– Enable UV/OC/VX detection when PGI>0.65V at power on mode
– Disable UV/OC/VX detection when PGI<1.2V at normal mode
- 4ms PSONB control to FPOB turn-off delay
- VCC under voltage lockout
- Reduce the usage of VR
- Package Type: SOP-10, SOP-14, DIP14
- Three channels for 12V OVP, UVP
Applications