Features

• • Analog input ports
    

    - 6 analog inputs
  

    - Support CVBS, S-Video, and YPbPr input
  

    - Video input resolution in 480i/p, 576i/p, 720p and 1080i
  

    - Support PC RGB input
  

    - RGB input resolution in 640x480, 800x600, 1024x768, 1280x800 and 1280x1024@60Hz
  

    - Support RGB CSYNC, SOG, Hsync and Vsync
  

    - Auto white balance, auto-gain/auto-phase adjustment
  

    - 3-channel low-power 10-bit ADCs integration for YPbPr and RGB support up to 108Mhz
  

  • Digital input ports
    

    - 8-bit 4:2:2 ITU-BT.656 or BT.601 interface
  

    - 16-bit 4:2:2 ITU-BT.656 or BT.601 interface
  

    - 16-bit RGB-565 interface
  

  • LCD panel interfaces
    

    - Support 18-bit and 24-bit digital panel, Serial RGB panel
  

    - Support single 8-bit LVDS panel output up to 1366x768
  

    - Support resolution: 640x480, 800x480, 800x600, 1024x768 and 1366x768 (digital/LVDS output)
  

    - Programmable timing controller for different type of panels
  

    - Programmable gamma table for panel compensation
  

  • 2D video decoder
    

    - 10-bit ADC
  

    - Supports CVBS, S-video and RGB input
  

    - Decodes NTSC (M, Japan, 4.43), PAL (B, G, D, H, I, Nc), and SECAM
  

    - Multi-standard adaptive 2D comb filter
  

    - Safe Hsync, Vsync and field signal outputs when VCR trick mode
  

    - Auto detection and decodes Macrovision copy protection
  

    - Chroma Transient Improvement (CTI)
  

    - Luma Transient Improvement (LTI), edge/sharpness improvement
  

    - Luma Coring noise reduction
  

  • Display format conversion
    

    - Programmable horizontal and vertical zoom ratio
  

    - Support no-linear scaling for 4:3 to 16:9
  

    - Convert interlaced input to progressive
  

  • Luminance and chrominance adjustments
    

    - Contrast adjustment with black/white level stretch
  

    - Brightness adjustment
  

    - Sharpness adjustment
  

    - Hue adjustment
  

    - Saturation adjustment
  

    - Flesh tone adjustment
  

  • OSD
    

    - Character based OSD
  

    - Font size: 16x18 dots
  

    - Font ROM: 512 single color fonts
  

    - Display RAM: 1024 x 24 bits (display up to 1024 characters)
  

    - User-font RAM: 4096 x 16 bits (up to 226 single color fonts)
  

    - Support 3-bit multi-color font
  

    - Border effect of character
  

    - Two display windows
  

    - Programmable background window
  

    - Support alpha blending
  

    - Support blinking effect
  

    - Support fade in/out effect
  

  • MCU
    

    - Built-in turbo 8051 MCU
  

    - Data memory: 256 + 768 bytes RAM
  

    - Support external program memory with serial flash memory via 4-wire interface
  

    - Support external MCU mode
  

  • 10-bit ADC for keypad scanning
    
  • Multiple communication interfaces
    

    - Two slave mode I2C interfaces, up to 400 kHz
  

    - Interface for ISP, ICE and other I2C master
  

    - Support dual standard UART, one of the UART can be defined for ISP/ICE channel
  

    - Support Infra-Red remote control
  

  • Four PWM outputs including one low frequency PWM
    
  • Charge pump circuits for VGH and VGL
    
  • DC-DC converter supports LED backlight with brightness control
    
  • General purpose I/Os
    
  • Spread spectrum PLL for panel clock
    
  • Built-in self test pattern generator
    
  • 24MHz crystal oscillator and support clock output for external MCU
    
  • Support multiple saving modes
    

   - Standby mode: all circuits can be powered down except MCU
  

   - Off mode: all circuits power down, MCU is waked up by interrupt
  

  • Operating temperature range: -40℃ to +85℃
    
  • Package type:
    

    - 128-pin LQFP, 14mm(L) x 14mm(W) x 1.4mm(H)
  

    - Green package available