Features

• • Embedded Turbo 8052 compatible CPU
    

    -Normal operation mode: 24MHz, 12MHz, 6MHz, 2MHz or 12MHz, 6MHz, 3MHz, 1MHz (Selectable Clock Sources)
  

    -Instruction execution time : Min. =125ns at OSC=24Mhz, MAX=500ns (“MUL” & “DIV” instruction)
  

  • Memory:
    

    -Flash memory : 64K Bytes
  

    -RAM: 1K+256 Bytes
  

  • 6 similar 8052 timer : Timer0, Timer1, Timer2, Timer3, Timer4, Timer5
    
  • 4 similar 8052 UART Ports, Support baud rate 115200 - 1200 at OSC=12/24MHz
    
  • 2 HV sync processor
    

    -Support 2 H/V inputs, Support H+V input
  

    -H/V frequency counter for monitoring DPMS
  

    -H/V input polarity detector and programmable H/V(HOUT/VOUT) output polarity
  

  • 10-bit A/D converter with 8 selectable inputs and can accepted external reference voltage (max=3.3v)
    
  • 8 8-bit PWM pin output and 4 10-bit selectable clock LPWM pin output
    
  • Support 1 DDC/CI /slave I²C interface, and 1 master/slave I2C interface
    
  • Hardware universal IR Receiver with 8 selectable inputs
    
  • Embedded H/W CEC function (CEC pad supports open drain structure)
    
  • Watch Dog timer
    
  • Build-in RTC
    
  • Power down mode
    

    -Selectable CPU clock sources
  

    -Support “IDLE” mode and “OFF” mode
  

    -CPU off mode can be waked up by external interrupt
  

  • Power consumption :
    

    -Typical 24mA at 24MHz mode
  

    -Typical 8mA at 2MHz mode
  

    -Typical 3mA at “IDLE” mode, only RTC alive mode
  

    -Lower than 100uA at “OFF” mode
  

  • Maximum 53 programmable IO pins
    
  • Build-in ISP function (IIC bus or UART bus)
    
  • Embedded ICE mode with 8 break points (IIC bus or UART bus)
    
  • Operation voltage: 3.6V – 3.0V (3.3V +/- 10%) (Tolerable IO structure – accept 5V signal input)
    
  • Package:   LQFP 64