WT8931

The WT8931 is a high performance image processor which incorporates a 32-bit RISC CPU with DSP instruction set that operates up to 180 MHz and optimized for image sensors with MIPI interface. In addition, the WT8931 embeds a hardware image processor unit (IPU) and supports input resolution up to 8 megapixels, providing real-time and superior visibility technology for camera applications. The WT8931 requires few external components and can be easily integrated into a camera module. It thus simplifies the system hardware design and shortens the time to market of the end product.

Features

        • Embedded 32-bit RISC CPU core
          - DSP instruction set
          - Up to 180 MHz operation frequency
          • Memory
          - Embedded serial flash 2MB
          - Internal 8KB I-cache
          - Internal 48KB DLM
          • Video inputs
          - MIPI CSI-2 (support virtual channel up to 3) 4 lanes, data rate up to 1Gbps/lane
          - Max. resolution: 640x480@360fps, 2M@60fps, 2M@30fps(w/ IPU HDR, 2:1 Exp), 3M@30fps, 4M@30fps, 5M@25fps, 8M@15fps(w/ sensor HDR)
          - Data formats : 8/10/12/14/16-bit Bayer RAW, YUV 4:2:2 8-bit
          - RGB-IR
          • Video outputs
          - MIPI CSI-2 4 lanes
          - Max. resolution: 8M@15fps
          - Bayer output follow input format, YUV 4:2:2 8-bit
          • Image Processing Unit (IPU)
          - Automatic Exposure Control(AEC)
          - Automatic Gain Control(AGC)
          - Auto White Balance(AWB)
          - Black Level Compensation
          - Lens Shading Correction
          - Spatial Domain Denoise
          - HDR Stitch
          - WDR Local Tone Mapping
          - Edge Enhancement
          - Bayer Patten Interpolation (Color Interpolation)
          - Color Correction Matrix
          - Gamma
          - YUV Processing (for brightness, contrast, saturation, and hue processing)
          • Communication interfaces
          - ISP and ICE interface
          - 2 master/slave mode I2C interfaces up to 400 kHz
          - 1 full-duplex UART up to 1.5 MHz
          - 1 master/slave SPI up to 12 MHz
          • Timer with 16-bit prescaler
          • GPIOs with configurable input/output direction and pull-up/pull-down resistor
          • Window Watchdog Timer (WWDT)
          • CPU clock source
          - External crystal oscillator 24 MHz (built-in PLL)
          • Power consumption
          - Operating: < 0.40W (2M@30fps)
          - Standby current: <1mA
          - Power supply 3.0V ~ 3.6V
          - Core power supply 1.08V ~ 1.32V
          - Host I/O power supply 3.0V ~ 3.6V
          - Sensor I/O power supply 1.6V ~ 3.6V
          • Operating temperature range: -40℃ ~ +85℃
          • Package type: QFN-64L (9x9)

應用領域

TOP